17 Years Factory Polyester/PVDF Prepainted Aluminum Coil to Vietnam Manufacturers
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for 17 Years Factory Polyester/PVDF Prepainted Aluminum Coil to Vietnam Manufacturers, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.
♦ Thickness: 0.06mm~1.0mm
♦ Width: 20mm~1590mm
♦ Material (alloy): 1100, 1050, 1070, 3003, 3004, 3105, 3005, 5005, 5052, 5754
♦ Surface Paint: PE, PVDF and special paints.
♦ Outside Diameter: ≤ 1500mm
♦ Inside Diameter: 405mm, 505mm, 150mm, 75mm
♦ Per Coil weight: ≤ 4000kg
The main material of PVDF is polyvinylidene fluoride resin; the utmost negative characteristic of the Fl atom can form a very strength high powerful Fl-C bond. Moreover, with the special symmetry molecule structure, the products are of strong weather resistance performance, anti-ultraviolet performance, super long durability and anti-corrosion performance, which can maintain very bright and glossy color even serving for 20 years in indoor environment. Attributing to the abrasion resistance and impact resistance and flexibility, our products are of excellent mechanical processing performance. PVDF coated aluminum coils are the highest priority of choice to high class aluminum composite panels, and its composite products are widely used in airport, exhibition center, administration center, star hotel and other symbol building.
Application for Polyester/PVDF Prepainted Aluminum Coil:
Suitable to construct curtain walls, ceilings, store faces, wallsand cellular panels
Chop & Wedge Service
Chop and wedge frame is shipped to you with the four sides of the frame not joined. Each of the mitered corners of the frame are routed to accept a plastic wedge insert. In order to join the four sides of the un-joined frame, simply follow the instructions below:
Apply a thin coating of wood glue to the corners of two adjacent sides (short and long sides) of the un-joined frame. Place the two sides face down on a clean and smooth hard surface. While holding the aligned corners together, place the plastic insert (thumbnail) into the groove. If necessary, you can lightly tap the insert down into the slot with a small hammer or mallet. Check the face of the molding. At this point you can slightly twist the corner if necessary in order to achieve a flush fit before the glue dries.
Repeat the above step on the other two adjacent sides. Allow these two “L” sections to dry for a brief period of time and then join the two “L” sections together. Apply glue to the remaining exposed corners. Holding the two completed “L” sections together face down, complete the frame assembly by inserting the plastic inserts into the remaining corner slots. Check the corners to ensure a flush fit and allow the glue to dry according to the manufacturer’s instructions before fitting your artwork into the completed frame.
If you are stacking inserts (placing one wedge on top of another) for joining taller moldings, insert the longer wedge in first, then use a small slotted screwdriver to lightly tap down the insert into the routed slot. The upper insert can then be installed.